-
-
Daily Cleaning and Maintenance
1.Before performing daily cleaning and maintenance, first gently remove dust from the sculpture’s surface using a Vikan dusting brush. Then rinse the sculpture with clean water (please do not use a high-pressure washer). Using a clean, fine-fiber cloth that will not scratch the surface—such as a 3M Microfiber Detail Cloth—dampen the cloth and gently wipe away dust, dirt, and water spots from the sculpture. Afterwards, use a dry cloth of the same material to thoroughly dry the entire sculpture.Avoid wiping the sculpture surface when it is dry, as any dust, sand, or other debris may cause damage to the delicate surface.
2.If bird droppings are found on the sculpture, they must be immediately softened with a clean, damp cloth and gently removed. Afterwards, clean the sculpture following Step 1. Bird droppings contain strong acids, and if not removed promptly, they may leave permanent stains on the sculpture’s surface.
3.It is recommended that each sculpture be professionally waxed and maintained by Li Chen’s studio staff at least once a year to preserve its smooth and lustrous finish. -
Outdoor Display of Li Chen’s Sculptures
-
-
Basic Cleaning Method
Before use, please ensure that all maintenance tools (Vikan dusting brush and 3M microfiber cloth) are thoroughly clean. Any foreign particles on the tools may cause damage to the sculpture’s surface during cleaning, so please take special care.
The basic cleaning method involves regularly using a Vikan dusting brush to gently remove dust from the artwork, following a top-to-bottom and inside-to-outside sequence. This helps prevent the accumulation of dust and dirt. If noticeable fingerprints are present, gently wipe them off with a 3M microfiber cloth using light pressure.
During cleaning and dusting, also inspect the artwork for any abnormalities. If you observe any signs of damage, oxidation, or other issues with the sculpture, please contact Asia Art Center immediately at +886-2-2754-1366 for professional assessment and restoration.
-
Illustrated Guide to Maintenance
Illustration and Maintenance Instructions
Simply use a clean Vikan dusting brush to gently remove dust from the surface of the artwork as part of routine care.
If there are fingerprints, gently wipe the affected area with a clean cotton cloth slightly dampened with water to remove them.
Recommended cloth: 3M Microfiber Detail Cloth.
-
Recommended Maintenance Tools
Vikan dusting brush|3M Microfiber Detail Cloth